Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Position Light on a Seat Leon

Model: Seat Leon 1P - Years 2005-2013
Part: Headlight bulb

Open and lift the bonnet, then remove the screws located approximately on the bonnet to take off the cover that conceals the rear of the headlamp. This will allow you to unlock the next cover by disengaging the retaining springs that hold it in place. After removing this panel, you will have access to the bulb connectors, so disconnect them and remove the bulbs that are secured by additional retaining springs. Carry out the necessary maintenance and replacements, then retrace your steps for reassembly.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on a Seat Leon Mk2?
How to reset the service light on a Seat Leon Mk2?
Seat Leon (2005-2013 / 1P) Let’s follow the author of this video to reset the service light on a Seat Leon MK2, which is the second model. Follow these steps: 1) locate the odo…
How to reset the service light on the Seat Leon 2
How to reset the service light on the Seat Leon 2
Seat Leon (2005-2013 / 1P) To manually reset the service light of your Seat Leon second series, you must follow the procedure described in our new guide. First of all, enter th…
How to Change the Wiper Blades on the Seat Leon
How to Change the Wiper Blades on the Seat Leon
Seat Leon (1999-2005 / 1M) On the SEAT Leon, start by positioning the wiper arms for easy access and lifting them away from the windscreen, so the blade is free and you can wor…

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos