Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Instrument Cluster on a Sherco SEF 300

Model: Sherco Sef 300
Part: Instrument cluster

Video tutorial

To replace the instrument cluster on the Sherco SEF 300, loosen the screws that secure the cluster to its housing so that it can be disconnected from the relevant connectors. Once the old cluster is freed, remove the front plastic panel of the bike as well.

At this point, insert the new instrument cluster, securing it to the handlebars with the appropriate screws and connecting it to the connectors. Finally, cover everything with the corresponding panel.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to Replace the Starter Motor on a Sherco SEF 300?
How to Replace the Starter Motor on a Sherco SEF 300?
Sef 300 To replace the starter motor on a Sherco SEF 300, locate this component, which is found at the lower front part of the frame. Once located, loosen th…
How to Replace the Clutch on a Sherco SEF 300?
How to Replace the Clutch on a Sherco SEF 300?
Sef 300 To replace the clutch on a Sherco SEF 300, you need to loosen the screws that secure the clutch cover, located on the right side of the bike: once th…
How to Replace the Spark Plug on a Sherco SEF 300
How to Replace the Spark Plug on a Sherco SEF 300
Sef 300 To replace the spark plug on a Sherco SEF 300, completely remove the seat of the bike to access the components underneath. Here, you will locate the …

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos