Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up the Antifreeze in the Sherco SEF 300?

Model: Sherco Sef 300
Part: Antifreeze coolant

Video tutorial

To top up the antifreeze in the Sherco SEF 300, locate the specific vent that allows you to insert the fluid into the corresponding reservoir: this vent is located on the right front side of the bike, immediately behind the fairing and under the handlebars.

At this point, you can add the necessary amount of coolant to the reservoir; once the top-up is complete, close the corresponding reservoir with the cap. This way, you can ensure that everything functions correctly.


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How to Replace the Starter Motor on a Sherco SEF 300?
How to Replace the Starter Motor on a Sherco SEF 300?
Sef 300 To replace the starter motor on a Sherco SEF 300, locate this component, which is found at the lower front part of the frame. Once located, loosen th…
How do you replace the fuel filter of the Sherco SEF 300?
How do you replace the fuel filter of the Sherco SEF 300?
Sef 300 In order to replace the fuel filter of the Sherco SEF 300, you need to locate the fuel passage conduit where the fuel filter is located: this will be…
Engine Oil and Oil Filter Replacement for the Sherco SEF 300
Engine Oil and Oil Filter Replacement for the Sherco SEF 300
Sef 300 Here are the instructions on how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Sherco SEF 300 enduro…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos