Do it yourself
| ||||
|
Model: Sherco Ty 125
In order to replace the engine oil of the Sherco TY 125, you need to loosen the screws that secure the drain plug of the oil pan: this plug will be located in the central lower part of the motorcycle. Once it has been removed, you can then collect the used oil inside a container that must be properly positioned. After removing the old oil, you can close the drain plug and perform the refill: this should be done by inserting the necessary amount of oil through the breather located on the right side of the motorcycle.
Posted on 16 November 2023 by ScegliAuto
|
How do you remove the rear light of the LML Star?In order to remove the rear light of the LML Star you need to loosen the two screws located in the half height of the light, on the left and right side of the latter. Once the two screws have been loosened, it will be possible to extract the headlight from inside its housing by disconnecting the connector at the rear. When the device has therefore been correctly disconnected, it will have to be removed from its housing in the rear part of the bike, connecting the new spare part; the latter can be fixed with the relative screws. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |