Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on a Sherco SEF 300?

Model: Sherco Sef 300
Part: Exhaust muffler

Video tutorial

To replace the exhaust on a Sherco SEF 300, loosen the bolts that secure it to the respective mounts located on the left side of the bike, near the rear mudguard: once the bolts are loosened, you can widen the ring that connects the exhaust to the exhaust pipe.

This will allow you to detach the exhaust from its housing so that you can insert the new one; once the new exhaust is in place, secure it to the respective mounts, connect it to the exhaust manifold, and check that everything is functioning correctly.


Updated on 8 September 2026 by ScegliAuto


Related tutorials

How do you replace the muffler of the Sherco SEF 300?
How do you replace the muffler of the Sherco SEF 300?
Sef 300 In order to replace the exhaust of the Sherco SEF 300, you need to loosen the screws that secure the panel located on the rear side of the motorcycle…
How to Replace the Exhaust on the Sherco SEF 300
How to Replace the Exhaust on the Sherco SEF 300
Sef 300 To replace the exhaust on the Sherco SEF 300, you need to loosen the screws securing the right side cover of the rear mudguard, under which the exhau…
How to Replace the Starter Motor on a Sherco SEF 300?
How to Replace the Starter Motor on a Sherco SEF 300?
Sef 300 To replace the starter motor on a Sherco SEF 300, locate this component, which is found at the lower front part of the frame. Once located, loosen th…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos