Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on the Sherco SEF 300

Model: Sherco Sef 300
Part: Exhaust muffler

Video tutorial

To replace the exhaust on the Sherco SEF 300, you need to loosen the screws securing the right side cover of the rear mudguard, under which the exhaust is located: this will allow you to free the exhaust from the screws holding it to its supports, so that it can be completely removed from its position, also widening the ring that connects it to the exhaust manifold.

Once the old exhaust has been removed, you can insert the new one into its position, securing it to the supports and connecting it to the manifold, ensuring everything works.


Updated on 11 October 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on a Sherco SEF 300?
How to Replace the Exhaust on a Sherco SEF 300?
Sef 300 To replace the exhaust on a Sherco SEF 300, loosen the bolts that secure it to the respective mounts located on the left side of the bike, near the r…
How do you replace the muffler of the Sherco SEF 300?
How do you replace the muffler of the Sherco SEF 300?
Sef 300 In order to replace the exhaust of the Sherco SEF 300, you need to loosen the screws that secure the panel located on the rear side of the motorcycle…
How to Replace the Starter Motor on a Sherco SEF 300?
How to Replace the Starter Motor on a Sherco SEF 300?
Sef 300 To replace the starter motor on a Sherco SEF 300, locate this component, which is found at the lower front part of the frame. Once located, loosen th…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos