Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Škoda Fabia?

Model: Skoda Fabia 5J, Mark2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

From the instrument panel of the Škoda Fabia, it will be possible to completely remove the Service light by holding down the 0.0 button located in the central part of the instrument panel, while the latter is deactivated. Once the button is held down, you will need to insert the ignition key into the corresponding slot and turn it to turn on the instrument panel: then you will need to wait a few seconds after turning it on, releasing the button and pressing the one next to it, with the icon of the two rectangles.

By pressing this button, you will notice that the Service light will be reset and you can turn off the instrument panel.


Posted on 8 April 2025 by ScegliAuto


Related tutorials

How to reset the Service light on a Škoda Fabia?
How to reset the Service light on a Škoda Fabia?
Skoda Fabia (2007-2014 / 5J, Mark2) To reset the Service light on a Škoda Fabia, turn on the ignition by turning the key in the ignition switch: once the ignition is on, repeatedly pres…
How to Reset the Service Light on a Škoda Fabia
How to Reset the Service Light on a Škoda Fabia
Skoda Fabia (2007-2014 / 5J, Mark2) To reset the Service light on a Škoda Fabia, press and hold the 0.0 button located in the centre of the instrument cluster while it is off. While hol…
How to Reset the Service Light on the Škoda Fabia
How to Reset the Service Light on the Škoda Fabia
Skoda Fabia (2014-2021 / Mark3, NJ) To reset the Service light on the Škoda Fabia, first inflate the tyres to the correct pressure: this value is written on the sticker inside the fuel …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos