Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear lights in the Skoda Fabia?

Model: Skoda Fabia 5J, Mark2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light

See other generations:
Video tutorial

In this tutorial, we can see how to disassemble the rear lights in the Skoda Fabia, an extremely simple and quick operation. First of all, make sure that the vehicle is turned off, so that you can work in complete safety, then open the trunk door, locate the bolt at the back of the headlight in question and unscrew it using a 5mm hex key. Then grab the headlight, separate it from the body by pulling it towards you, and disconnect the power connector.

At this point, all that's left is to replace the faulty element and reassemble everything following the reverse procedure.


Posted on 15 October 2025 by ScegliAuto


Related tutorials

How to Remove the Rear Lights on the Skoda Fabia?
How to Remove the Rear Lights on the Skoda Fabia?
Skoda Fabia (2014-2021 / Mark3, NJ) In this tutorial, we can see how to remove the rear lights on the Skoda Fabia, a very simple and quick operation. First, ensure that the instrument p…
How to Replace the Rear Lights on a Skoda Fabia?
How to Replace the Rear Lights on a Skoda Fabia?
Skoda Fabia (2007-2014 / 5J, Mark2) In this tutorial, you will see how to replace the rear lights on a Skoda Fabia, a very simple and quick operation. First, ensure that the key is not …
How to replace the rear lights in the Skoda Fabia?
How to replace the rear lights in the Skoda Fabia?
Skoda Fabia (2007-2014 / 5J, Mark2) In this tutorial we can see how to replace the rear lights in the Skoda Fabia, an extremely simple and fast operation. First of all, make sure that t…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos