Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Service Light on Skoda Citigo

Model: Skoda Citigo MK 1 - Years 2011-2020
Part: Service warning light

Briefly, we will cover the procedure for resetting the service light on the Skoda Citigo, as well as on the Volkswagen Up and the Seat Mii. First, get into the vehicle and press and hold the "set" button located on the instrument panel; then turn the ignition on by turning the key to position one, as shown in the video. At this point, keep the button pressed for about five seconds, release it, and then press it once more; this will reset the INSP light displayed on the instrument panel.

Posted on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Skoda Citigo
Skoda Citigo (2011-2020 / MK 1) Today we will explain how to reset the service light, related to the maintenance on a Skoda Citigo vehicle. To manually reset the light, we should tu…
Resetting the inspection (service) light of the Skoda Citigo
Resetting the inspection (service) light of the Skoda Citigo
Skoda Citigo (2011-2020 / MK 1) In a few simple steps, we will see how to reset the inspection (service) alert of the Skoda Citigo, following the instructions below. First, we get i…
How to reset the service light on the Skoda Citigo
How to reset the service light on the Skoda Citigo
Skoda Citigo (2011-2020 / MK 1) If the service light on the instrument panel of your Skoda Citigo continues to stay on constantly, then it is time to discover together how to perfor…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos