Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Škoda Scala?

Model: Skoda Scala MK 1 - Years 2019-2026
Part: Service warning light

You can completely clear the Service light displayed on the instrument cluster of the Škoda Scala by holding down the 0.0/SET button located at the bottom centre of the instrument cluster while it is deactivated: continue to hold it down, insert the ignition key into the ignition switch, and turn it to switch on the display. At this point, wait until the light has completely disappeared from the screen: at that point, you can release the button and complete the operation by turning off the display.

Posted on 20 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Škoda Scala?
How to Reset the Service Light on a Škoda Scala?
Skoda Scala (2019-2026 / MK 1) It is possible to completely clear the Service light from the instrument panel of a Škoda Scala by holding down the 0.0/SET button located at the bot…
How do you reset the Service light on the Škoda Scala?
How do you reset the Service light on the Škoda Scala?
Skoda Scala (2019-2026 / MK 1) To completely reset the Service light on the Škoda Scala, you will need to hold down the 0.0/SET button located in the center bottom of the instrumen…
How to Reset the Service Light on a Škoda Scala?
How to Reset the Service Light on a Škoda Scala?
Skoda Scala (2019-2026 / MK 1) You can reset the service light on a Škoda Scala by turning on the instrument cluster with the ignition key in the lock: once the cluster is activate…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos