Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Skoda
  4. :
  5. Fabia
  6. : How to remove the radiator of the Skoda Fabia

Skoda Fabia - Video tutorial

Model: Skoda Fabia 5J, Mark2 - Years 2007-2014
Part: Radiator
Operation: How to remove the radiator of the Skoda Fabia

Let's see how the radiator of a Skoda Fabia is removed. Let's see the disassembly of the pieces. We open the engine hood, disassemble the front bumper before disassembling the radiator. Remove the plates that block the radiator in the upper part, then we lift the car on a column bridge and loosen the clamp of the water hose. We detach the various convoy sleeves of the refrigeration system with pliers, (we unscrew the lock that blocks the front hood if it hinders the extraction). We disassemble the fan kit (if necessary to remove the radiator) and immediately after the radiator from the engine compartment. We mount the car bumper at the end of the radiator assembly. We test the operation of the entire car system.


Posted on 7 January 2024 by ScegliAuto



How to change the heating radiator of the Skoda Fabia MK1
Skoda Fabia (1999-2007 / Mark1, 6Y) Let's find out in this guide the main steps to remove and replace the internal radiator of the passenger compartment heating of the first series Skod
How do you replace the radiator on a Škoda Fabia?
Skoda Fabia (1999-2007 / Mark1, 6Y) In order to replace the radiator of the Škoda Fabia, it is necessary to completely remove the bumper by unscrewing all the screws that fix it from th
Where is it and how to get to the fuse box of a Skoda Fabia?
Skoda Fabia (1999-2007 / Mark1, 6Y) The fuse box of our Skoda Fabia is located on the left side of the dashboard. In order to reach it, therefore, we will have to start by opening the f

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos