Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Number Plate Holder on the Škoda Fabia?

Model: Skoda Fabia 6Y, Mark1 - Years 1999-2007
Part: Checks and maintenance

To replace the number plate holder on the Škoda Fabia, remove the two fixing pins located at the bottom of the number plate, on the right and left sides. This will allow you to unscrew the bolts securing the number plate holder, which is covered by the number plate itself. Once the bolts securing the piece have been loosened, replace it with a new spare part and secure it with the appropriate bolts that were previously removed. Finally, position the number plate in its housing and secure it with the appropriate screws.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Skoda Fabia (2007-2014 / Mark2, 5J) To replace the battery on a Škoda Fabia, open the engine bay and locate the battery, which is situated near the left front headlight. The battery wil…
Skoda Fabia (2007-2014 / Mark2, 5J) To replace the window regulator on the Škoda Fabia, unscrew the screws securing the door panel to its housing: these are located under the trim of th…
Skoda Fabia (1999-2007 / 6Y, Mark1) In order to replace the window regulator of the Škoda Fabia, first you need to remove the corresponding door panel: to do this, you will need to deta…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos