Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure on Skoda Octavia

Model: Skoda Octavia MK 3, 5E - Years 2012-2019
Part:

The tyre pressure warning light may illuminate when you replace the tyres on the vehicle or inflate the tyres. The sensors detect a change in pressure and send a signal to the control unit, which activates the tyre pressure warning light. If the light remains on, it indicates that the tyre work was not fully completed. Once the tyre pressure is restored, get in the vehicle, engage the handbrake, insert the key, and turn on the ignition. At this point, press the CAR button located to the right of the radio, then press the "Setup" button, select "tyres", press the "SET" button, and confirm.

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure on a Skoda Octavia
How to reset the tire pressure on a Skoda Octavia
Skoda Octavia (2019-2026 / MK 4, NX) Today we will see how to reset the tire pressure indicator on a Skoda Octavia, the latest model produced from 2019 onwards. Let's start the procedure…
How to Reset the Tyre Pressure on a Skoda Octavia
How to Reset the Tyre Pressure on a Skoda Octavia
Skoda Octavia (2012-2019 / MK 3, 5E) Today, let's see how to reset the tyre pressure on a third-generation Skoda Octavia. Start by turning on the vehicle's ignition, then navigate to the…
How to Reset the Tyre Warning Light on a Skoda Octavia
How to Reset the Tyre Warning Light on a Skoda Octavia
Skoda Octavia (2012-2019 / MK 3, 5E) In today's article, you will learn how to reset the tyre warning light on a Skoda Octavia. Before performing this operation, it is advisable to ensur…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos