Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Kodiaq
    4. : How to reset the service indicator on the Skoda Kodiaq

Skoda Kodiaq - Video tutorial

Model: Skoda Kodiaq MK 1 - Years 2017-2023
Part: -board computer
Operation: How to reset the service indicator on the Skoda Kodiaq

In today's article, we will see how to reset the service light of the Skoda Kodiaq in case it remains on after having the service done. To perform this operation, we will not need any tools. To reset it, we need to get into the car, then insert the key without turning it, at this point press and hold the 0.0/SET button located in the center of the dashboard, keeping it pressed start the engine and wait for the message on the dashboard to appear indicating to perform the reset. When this message appears, release the button and press it again to confirm the reset. At this point, the procedure will be completed and we can restart the engine to verify that the procedure was successful.


Posted on 9 March 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos