Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Remote Battery in a Skoda Kodiaq

Model: Skoda Kodiaq MK 1 - Years 2017-2023
Part: Key

To independently replace the battery inside your first-generation Skoda Kodiaq remote, carefully read the following guide and apply all the described steps. Before starting, ensure you have a small flathead screwdriver and a new compatible battery for the key (model CR2032). At this point, use the flathead screwdriver to easily remove the back cover of the remote, then remove the flat battery and replace it with the new one. Finally, reassemble the back cover, and you are done.

Posted on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Skoda Kodiaq (2017-2023 / MK 1) If the battery of your Skoda Kodiaq remote should run out, you may have difficulty accessing the vehicle and starting it as the keyless system no lon…
Skoda Kodiaq (2017-2023 / MK 1) In today's video, see how to replace the remote key battery on the Skoda Kodiaq. This tutorial also applies to other models from the Czech manufactur…
Skoda Kodiaq (2017-2023 / MK 1) To replace the remote battery of the Škoda Kodiaq, lift the ignition key by pressing the designated button at the top of the device. Once the key is …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos