Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Superb
    4. : Resetting the TPMS light on Skoda Superb

Skoda Superb - Video tutorial

Model: Skoda Superb B6, 3T - Years 2008-2015
Part: Checks and maintenance
Operation: Resetting the TPMS light on Skoda Superb

In this useful tutorial today, we can see the necessary procedure to reset the TPMS light, which is the tire pressure light, on a second-generation Skoda Superb, model produced from 2008 to 2015. So the operation is really very simple to do, but before performing it, it is essential to check that the pressure of all four tires is as indicated by the manufacturer. Well, to perform the reset, we turn on the vehicle's ignition, then press the "SET" button, with the TPMS light icon, located on the gear lever panel.


Posted on 14 May 2024 by ScegliAuto



How to reset the tire indicator in the Skoda Superb?
Skoda Superb (2008-2015 / B6, 3T) Resetting the tire pressure warning light in the Skoda Superb, as we can see in this tutorial, is an extremely simple and quick operation. Before doi
How to reset the partial trip on a Skoda Superb?
Skoda Superb (2015-2023 / 3V, B8) Good morning, today I will guide you through the process of resetting the partial trip on your Skoda Superb. To begin, let's carefully enter the car.
How to reset the oil service light on Skoda Superb?
Skoda Superb (2008-2015 / B6, 3T) Resetting the service on a Skoda Superb, as we can see in this tutorial, is a very simple and quick operation. Before proceeding, make sure that all

    Frequently Asked Questions

    • Superb 2008-2015 - Why does the central locking of the rear door of a Skoda Superb not work? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos