Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on the Skoda Superb

Model: Skoda Superb B6, 3T - Years 2008-2015
Part: Warning light – error code

If the TPMS light on the display of your Skoda Superb remains on even though there is no puncture, you must proceed with the manual reset of the light. Below we explain step by step how to perform this operation in a few seconds. First, enter the car and make sure the instrument panel is on, then locate the "Set" button located next to the gear lever and hold it down for a few seconds. Wait for the reset of the light to be completed and finally turn off the instrument panel of your Skoda Superb.

Posted on 15 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light in the Skoda Superb?
How to reset the tire pressure warning light in the Skoda Superb?
Skoda Superb (2015-2023 / 3V, B8) In this tutorial, we can see how to reset the tire pressure warning light in the Skoda Superb, an extremely simple and quick operation, to be done on…
How do you reset the Service light on the Škoda Superb?
How do you reset the Service light on the Škoda Superb?
Skoda Superb (2008-2015 / B6, 3T) In order to reset the Service light of the Škoda Superb, you need to insert the ignition key into the ignition switch: with the instrument panel turn…
How do you reset the Service light on the Škoda Superb?
How do you reset the Service light on the Škoda Superb?
Skoda Superb (2023-2026 / B9, 3Y) To reset the Service light of the Škoda Superb, you will first need to turn on the instrument panel by inserting the ignition key into the correspond…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos