Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Smart Fortwo

Model: Smart Smart 451 - Years 2007-2015
Part: Service warning light

In this guide, we will see the instructions that will allow us to reset the maintenance reminder for the engine oil change of the Smart Fortwo. First, we get into the car and start the instrument panel; then we go to the maintenance section by pressing the left button on the panel, as shown in the video. At this point, we turn off the panel and hold down the same button, then turn on the panel again to confirm and reset the maintenance key, following the video tutorial until the end!

Posted on 6 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Smart Fortwo service light
How to reset the Smart Fortwo service light
Smart (2007-2015 / 451) Below we will see instructions on how to reset the service light of the routine maintenance of the engine oil change of the Smart Fortwo. First of al…
How to reset the service indicator of the Smart Fortwo
How to reset the service indicator of the Smart Fortwo
Smart (2007-2015 / 451) Today's information will allow us to reset the service indicator of the Smart Fortwo, in simple and quick steps. First, we get on board the car and s…
How do you reset the Service light of the Smart Fortwo?
How do you reset the Service light of the Smart Fortwo?
Smart (1998-2007 / 450) To reset the Service light on the Smart Fortwo, you need to press and hold the button located on the rear right side of the instrument panel while it…

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos