Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you install the spoiler on the Smart ForTwo?

Model: Smart Smart 451 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Checks and maintenance

See other generations:
Video tutorial

In order to install the spoiler on the Smart ForTwo, you need to open the rear hatch so that you can locate the trim on the top inside the hatch: this trim will need to be removed in order to loosen the screws underneath it. This will allow you to detach the additional panel on the top outside of the hatch: here you can now position the spoiler so that it can be secured with the appropriate locking screws.

After installation, you will need to reinsert the inner panel to secure it in place.


Posted on 16 December 2024 by ScegliAuto


Related tutorials

Removing the Spoiler on a Smart Fortwo
Removing the Spoiler on a Smart Fortwo
Smart (1998-2007 / 450) In this video tutorial, you will learn how to remove the rear spoiler from a Smart Fortwo. The operation itself is not complex; just follow the steps…
How to Remove the Third Brake Light on a Smart Fortwo
How to Remove the Third Brake Light on a Smart Fortwo
Smart (1998-2007 / 450) Follow this guide to remove the third brake light on a Smart Fortwo. To remove the central light, unscrew the screws located above it. Once the light…
How to Replace the Speaker in a Smart Fortwo
How to Replace the Speaker in a Smart Fortwo
Smart (2007-2015 / 451) The following steps will guide you on how to dismantle and replace the front door speaker in a Smart Fortwo. First, open the front door of the vehicl…

    Frequently Asked Questions

    • Smart 1998-2007 - How do you unlock the Smart Fortwo immobilizer? Read answer
    • Smart 1998-2007 - Where is the horn of the Smart 450 located? Read answer
    • Smart 1998-2007 - Where is the jack on a Smart ForTwo? Read answer

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos