Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear bumper of the Smart Fortwo

Model: Smart Smart 453 - Years 2014-2022
Part: Rear bumper

Below we will see the instructions that will allow us to disassemble and replace the rear bumper of the Smart Fortwo. First, we open the rear hatch of the trunk and start removing all the fastening screws we find next to the hinges of the hatch; then we unscrew the additional screws on both sides of the wheel arches, as shown in the video. At this point, we gently detach the bumper on the sides until it is completely removed, replacing it if necessary with the new one; we reassemble and properly fix the new bumper, applying the reverse procedure!

Posted on 14 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear bumper of a Smart ForTwo
How to remove the rear bumper of a Smart ForTwo
Smart (2007-2015 / 451) Before we begin, we will need to open the tailgate of the luggage compartment of our Smart ForTwo. So let's start by unscrewing and removing the scre…
Disassembly of the rear bumper of the Smart Fortwo
Disassembly of the rear bumper of the Smart Fortwo
Smart (1998-2007 / 450) Let's see below the step-by-step instructions that will allow us to disassemble and replace the rear bumper of the Smart Fortwo. First, we open the r…
How to remove the bumpers (front and rear) of the Smart Fortwo
How to remove the bumpers (front and rear) of the Smart Fortwo
Smart (1998-2007 / 450) The following steps will show us how to disassemble and remove the bumpers (front and rear) of the Smart Fortwo. Let's start by disassembling the rea…

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos