Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you set the Smart clock?

Model: Smart Smart 453 - Years 2014-2022
Part: Clock

It will be possible to adjust the clock of the Smart by turning on the instrument panel and then pressing the SETUP button located just below the radio display. A screen will appear from which you will need to select the "Clock" option by pressing the OK button on the right. At this point, you can set the time by turning the knob around the OK button. Once the hour is selected, you can also select the minutes by performing the same operation. When the hours and minutes have been selected, you must confirm the entry with the OK button and check the new time by returning to the initial screen.

Posted on 2 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you set the clock on the Smart device?
How do you set the clock on the Smart device?
Smart (2007-2015 / 451) In order to adjust the Smart watch, you first need to turn on the instrument panel by turning the key in the ignition switch. Once the panel is on, y…
How do you set the clock on the Smartwatch?
How do you set the clock on the Smartwatch?
Smart (1998-2007 / 450) In order to adjust the clock of the Smart, you need to turn on the instrument panel by inserting the ignition key into the corresponding ignition blo…
How do you set the clock on the Smartwatch?
How do you set the clock on the Smartwatch?
Smart (2007-2015 / 451) The clock shown on the Smart's display must first be turned on by turning on the instrument panel, inserting the key into the ignition switch: once t…

Removing the Rear Door Panel of the Punto Evo

Here’s how to remove the rear door panel: gently pull the window lift lever and detach the metal clip holding it in place using a flathead screwdriver; once removed, take off the plastic cap behind the door opening lever and unscrew the hex screw inside, along with the two screws located under the panel handle as shown in the video. After removing the two cross-head screws under the door panel, you can detach it from the door using two levers to extract the plastic clips (taking care not to break them). Once the panel is separated, disconnect the wire that operates the door opening lever by detaching it from its housing as demonstrated in the video. After completing the necessary operation (in the video, the window lifter was being fixed), proceed in reverse order to reposition the panel, close it, and secure it.

Watch the video!


by ScegliAuto

More videos