Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the Smart ForTwo?

Model: Smart Smart 450 - Years 1998-2007
Part: Fuse box

The fuses of the Smart are located in the only fuse box present in the vehicle: in this type of vehicle, the box will be positioned in the dashboard area immediately below the steering column. It can be identified by removing the corresponding panel to gain access to the components inside: here you will find the fuses that control the operation of the courtesy lights, the horn, the low beam headlights, etc. Each fuse can be replaced with a new one that has the same amperage as the one removed.

Posted on 16 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Smart ForTwo?
Where are the fuses located in the Smart ForTwo?
Smart (1998-2007 / 450) The fuses for the Smart ForTwo are contained within the appropriate fuse box that is installed in the vehicle. The box is located in the dashboard ar…
Where are the fuses located in the Smart ForTwo?
Where are the fuses located in the Smart ForTwo?
Smart (2014-2022 / 453) Each fuse of the Smart ForTwo is inserted inside one of the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it will…
Where are the fuses located in the Smart ForTwo?
Where are the fuses located in the Smart ForTwo?
Smart (2014-2022 / 453) In the Smart ForTwo, all fuses are contained within a single fuse box that is installed in the vehicle: in this car model, the box is located inside …

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2007-2015 - Where is the fuel pump relay on a Smart ForTwo located? Read answer

How to Remove the Distributor from a Fiat Panda

How to remove the distributor from a Fiat Panda? Lift the bonnet and secure it, then use a screwdriver to unscrew the locking pins of the ventilation pipe, remove the engine soundproofing panel and the cap (detach it). Start by unscrewing the fastening pins of the distributor (as shown in the video); remove the distributor from the engine housing. Install a new distributor inside the engine bay, connect the various cables and close with the cap. Refit all previously removed parts (soundproofing panel, filter, etc.) and test the correct operation.

Watch the video!


by ScegliAuto

More videos