Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Tips for Replacing the Air Filter on a Smart

Model: Smart Smart 453 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Air filter

See other generations:
Video tutorial

Replacing the air filter is very simple; you can do it in just two minutes with a screwdriver. Park the car safely and access the engine compartment, ensuring the engine is cold.

Lift the carpet, loosen the clamp on the air duct nearest to the filter with the screwdriver, then remove it and seal the duct. Before removing the protective cover, unscrew two screws.

Replace the old filter with the new one. Refit the plastic cover and screw in the two screws, being careful not to lose them in the engine compartment. Reattach the air duct and tighten the clamp.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the Smart 450
How to Replace the Air Filter on the Smart 450
Smart (1998-2007 / 450) If you want to avoid overheating or loss of power in your Smart 450, you must periodically replace the air filter. Below, we will discover how to per…
How to Replace the Cabin Air Filter on a Smart ForTwo
How to Replace the Cabin Air Filter on a Smart ForTwo
Smart (2007-2015 / 451) Before you start, enter the cabin of your Smart ForTwo. Begin by unclipping the clips that secure the cabin air filter cover, located near the driver…
Removing the Engine Air Filter on a Smart Fortwo
Smart (2007-2015 / 451) Removing the engine air filter? Remove the engine air filter from the Smart Fortwo located in the engine compartment. Open the engine compartment of …

Replacing the Gear Knob on the Renault Espace

The following steps will show you how to remove and replace the gear knob of the manual gearbox on the Renault Espace. First, get in the vehicle and start by removing the small upper cover of the knob; to remove it, simply pull the gear knob upwards with force to detach it from the lever, as shown in the video. At this point, remove and replace the gear gaiter if necessary, installing the new one; finally, insert the new gear knob, securing it properly onto the lever (ensure there is no play between the lever and the knob).

Watch the video!


by ScegliAuto

More videos