Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove rear pads on Smart Fortwo

Model: Smart Smart 451 - Years 2007-2015
Part: Brake pads

Replacing damaged pads on a Smart Fortwo? Let's see how they disassemble. We raise the car on a column point up to the desired height, immediately after we go to remove the rim with the respective pins. We unscrew the locking pin of the brake caliper, remove the same from the wheel support. We remove the pads from the brake caliper with a screwdriver. Let's go and mount the new pads on the brake caliper. We mount the brake caliper above the brake disc (we tighten all the pins and mount the wheel). We replace the other worn tablets of the Smart Fortwo.

Posted on 20 July 2020 by ScegliAuto

Video tutorial

Related tutorials

How to replace the brakes on the Smart Fortwo
How to replace the brakes on the Smart Fortwo
Smart (2007-2015 / 451) Worn brake pads? Let's see how they disassemble on a Smart Fortwo. We raise the car on a column point to the desired height: we remove the circle wit…
Change the tablets of the Smart Fortwo
Change the tablets of the Smart Fortwo
Smart (2007-2015 / 451) We replace the worn front disc brake pads of the Smart Fortwo. We remove the front wheel, unscrew the brake caliper locking pin, remove the same from…
Remove the brake pads on Smart Fortwo
Remove the brake pads on Smart Fortwo
Smart (2007-2015 / 451) Remove the front disc brake pads if worn on a Smart Fortwo. Let's see how they disassemble from the disc brake. We position the vehicle on a column b…

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos