Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the battery on Smart Fortwo (w450)

Model: Smart Smart 450 - Years 1998-2007
Part: Battery

The battery of the Smart unlike most cars is located inside the passenger compartment under the passenger side mat. First of all, in fact, it will be necessary to extract the mat and lift the carpet to identify it easily, this will be fixed inside its housing by means of a metal band that can be disassembled simply by unscrewing the nut that fixes it in position. Once the fastening band has been removed, it will be necessary to disconnect the cables, these will be fixed to the two battery poles by means of two clamps that can be detached by unscrewing the pin above them, it is also advisable to first remove the negative pole and pay attention to do not create any kind of contact between the two poles. Once both poles have been disconnected, you can proceed by disconnecting the acid vent tube on the side of the battery itself. For this operation it is advisable to protect your hands using a pair of gloves. At this point the battery will be permanently disconnected from the car and can be removed from its housing to be recharged or replaced with a new one.

Posted on 12 September 2020 by ScegliAuto

Video tutorial

Related tutorials

Smart (2007-2015 / 451) Below we will see the main steps that will allow us to disassemble and replace the traction battery of the Smart Fortwo electric version. First, we l…
Smart (2014-2022 / 453) Below we will see the main steps that will allow us to disassemble and replace the battery of the Smart Fortwo. First, we open the front hood of the …
Smart (1998-2007 / 450) Today's guide will show us the steps that will allow us to disassemble and replace the battery of the Smart Fortwo. First we open the front door, on …

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2007-2015 - How many Ah should the battery of the Smart 451 be? Read answer
    • Smart 2007-2015 - Where is the Smart battery located? Read answer

Remove the Front Door Panel on Jeep Renegade

How to remove the front door panel on a Jeep Renegade? Follow these steps: before starting the disassembly, disconnect the battery terminals located in the engine compartment. Begin disassembly: using a lever, remove the switch panel located on the door handle, then use a screwdriver to unscrew the securing screws located there. Once all screws are removed, detach the plastic clips that secure the door. Remove the door panel by hand, disconnect the power connectors and the door release cable.

Watch the video!


by ScegliAuto

More videos