Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the Smart Fortwo headlight

Model: Smart Smart 451 - Years 2007-2015
Part: Headlight

In the video tutorial we will see how to remove the headlight of a Smart Fortwo 450; this operation will also allow us to access the bulbs to replace them. First of all we are going to remove our front bumper together with the engine hood: then we are going to unscrew the support screws of the headlight that we find below and to the side: once done we go to extract the headlight very gently so as not to damage the supports . Now we can go and disassemble the bulbs if we want or we can go to replace the headlights and fit new ones. The video also shows how to try to polish them with polish!

Posted on 6 October 2020 by ScegliAuto

Video tutorial

Related tutorials

How to remove the gear knob of a Smart ForTwo
How to remove the gear knob of a Smart ForTwo
Smart (2004-2006 / 454, Fourfour1) Before we begin, we will have to sit in the driver's seat of our Smart ForTwo. In order to be able to carry out this disassembly in complete safety, …
Removing the Radio on a Smart Fortwo
Removing the Radio on a Smart Fortwo
Smart (2007-2015 / 451) Remove the damaged radio from a Smart Fortwo. Take off the trim around the stereo using a plastic lever (where the air vents are located) and detach …
How to remove the front bumper of a Smart ForTwo
How to remove the front bumper of a Smart ForTwo
Smart (2004-2006 / 454, Fourfour1) Before we can begin, we will have to go and open the doors of our Smart ForTwo. So let's start by unscrewing and removing the screws that secure the …

Other guides you may be interested in

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos