Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the external handle and repair of the Smart Fortwo 451

Model: Smart Smart 450 - Years 1998-2007
Part: Handle

In this video tutorial we will see how to remove the external door handle and how to repair it on a Smart Fortwo first series. First we open the front door and we go to remove the external handle, unscrewing the screws of the side lock that we find on the sides of the door; then we extract the handle from the outside, perhaps leveraging something thin, and disconnect its cable. At this point we are going to disassemble all the components of the handle and carry out the repair of the same, as shown in the video. Finally, reassemble everything, applying the reverse procedure!

Posted on 17 January 2021 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the Smart 451 handle
Disassembly of the Smart 451 handle
Smart (2007-2015 / 451) How to remove the outside handle of the Smart Fortwo? Let's see briefly how to remove the handle and how to remove it from the door housing. In order…
Smart Fortwo door handle replacement
Smart Fortwo door handle replacement
Smart (1998-2007 / 450) How do you remove the outside handle of a Smart Fortwo? We open the right or left door of the car and see the removal of the external handle. Using a…
How to replace the outside handle of the Smart Fortwo Cabrio
How to replace the outside handle of the Smart Fortwo Cabrio
Smart (2007-2015 / 451) Replace the handle of the Smart Fortwo? Let's see how the opening handle is removed from inside the Smart door. We open the car door, unscrew the scr…

How to Remove the Spark Plugs on an Opel Astra

Want to remove the spark plugs on an Opel Astra? Here's how to proceed: pull the engine bay release lever and lift the front bonnet, securing it. Remove the plastic cover on the soundproofing panel covering the engine (if present), then remove the pins on the coil bar using a screwdriver. Disconnect the coils by hand after unplugging the power connector, then use your socket to unscrew the spark plugs and pull them out of the cylinder head. Take the new spark plugs and guide them into the engine head with the socket extension, tighten them and reconnect the respective power connectors. Finally, close the engine bay.

Watch the video!


by ScegliAuto

More videos