Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace a fuse on the Smart Fortwo 453

Model: Smart Smart 453 - Years 2014-2022
Part: Fuse box

Is an electrical part of our Smart not working? Let's see the replacement of fuses on Smart. We open the door and unhook the dashboard operating flap. Remove the lining placed in the glove compartment with a plastic lever. Remove the damaged fuses placed in the compartment with needle nose pliers. Once this operation has been carried out, let's insert the new fuses in the appropriate dedicated housing. We close the fuse holder inspection box with the drawer closing door. Finally, we test the correct functioning of the electrical parts of the car.

Posted on 15 May 2021 by ScegliAuto

Video tutorial

Related tutorials

What is the Smart ForTwo fuse scheme?
What is the Smart ForTwo fuse scheme?
Smart (2014-2022 / 453) In this video we can see the position of the fuse boxes, and the relative diagrams, in the Smart ForTwo 453, to be consulted in case we need to check…
Instructions for removing the rear bumper Smart Fortwo 453
Instructions for removing the rear bumper Smart Fortwo 453
Smart (2014-2022 / 453) Let's see in this video the main instructions to be able to remove the rear bumper on a Smart Fortwo 453, in simple and quick steps. First we are goi…
How to replace the front turn signal bulb of the Smart Fortwo 453
How to replace the front turn signal bulb of the Smart Fortwo 453
Smart (2014-2022 / 453) If you own a Smart Fortwo 453 and want to replace one of the front turn signal bulbs by yourself, just follow the following guide and apply the descr…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2007-2015 - Where is the fuel pump relay on a Smart ForTwo located? Read answer

How to Remove the Dome Light in a Mercedes C-Class

In this video, see how to replace the bulb or LED in the dome light of a Mercedes C-Class. Using a screwdriver or plastic trim tool, pry between the dome light cover and its perimeter (without breaking the plastic), remove the grille from the dome light, and then take out the clear plastic cover. Replace the damaged bulb with a new one (same size and voltage). Reinstall the plastic cover in its housing (press it in with your hands until the tabs are fully secured). Test the light's proper functioning before reinstalling the piece.

Watch the video!


by ScegliAuto

More videos