Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front turn signal bulb of the Smart Fortwo 453

Model: Smart Smart 453 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Headlight bulb

See other generations:
Video tutorial

If you own a Smart Fortwo 453 and want to replace one of the front turn signal bulbs by yourself, just follow the following guide and apply the described steps. First, purchase a new bulb that is perfectly compatible with your car, then make sure the vehicle is completely turned off and go outside.

Position yourself next to the wheel on the same side as the bulb to be replaced. At this point, remove the wheel arch cover and disassemble the bulb holder.

Finally, replace the old bulb with the new one and reassemble the protective cover.


Posted on 29 June 2025 by ScegliAuto


Related tutorials

Replacing the Headlight Bulb on the Smart Fortwo 453
Replacing the Headlight Bulb on the Smart Fortwo 453
Smart (2014-2022 / 453) In this short and simple guide, you will find the main instructions for removing and replacing the headlight bulb on the Smart Fortwo 453. First, ope…
How to Replace the Side Indicator Bulb on a Smart ForTwo
How to Replace the Side Indicator Bulb on a Smart ForTwo
Smart (2007-2015 / 451) Before you begin, exit your Smart ForTwo and head to the side indicator. Start by inserting the tip of a flathead screwdriver into the gap between th…
How to Replace the Wheel on a Smart Fortwo 453
How to Replace the Wheel on a Smart Fortwo 453
Smart (2014-2022 / 453) In this short video, you will find the main guide for removing and replacing the front wheel, which also applies to the rear wheel, of the Smart Fort…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos