Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulb on the Smart Fortwo 453

Model: Smart Smart 453 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Headlight bulb

See other generations:
Video tutorial

In this short and simple guide, you will find the main instructions for removing and replacing the headlight bulb on the Smart Fortwo 453. First, open the bonnet and start by removing the protective cap of the bulb; then disconnect the electrical connector and unclip the metal spring to remove the bulb, as shown in the video.

Now, replace the bulb with a new one that has the same fitting; in this case, a new LED bulb compatible with your vehicle is installed, following the video to the end for reassembly!


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Remove the Headlight Bulb on a Smart ForTwo?
How to Remove the Headlight Bulb on a Smart ForTwo?
Smart (2004-2006 / Fourfour1, 454) Start by removing the upper front cover of your Smart ForTwo using the ignition key, then remove the underlying plastic. Next, unclip and remove the …
How to Replace the Front Headlamp Bulb on the Smart 453?
How to Replace the Front Headlamp Bulb on the Smart 453?
Smart (2014-2022 / 453) To replace the headlamp bulb on the Smart 453, pull the two clips located on either side of the car's grille to lift the front bonnet. Once removed, …
Replacing the Headlight Bulbs on a Smart Fortwo
Replacing the Headlight Bulbs on a Smart Fortwo
Smart (2014-2022 / 453) Replace the damaged bulbs in the front headlight of a Smart Fortwo: remove the front bonnet as shown in the video, reach in and disconnect the bulb f…

Other guides you may be interested in

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos