Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Smart
  4. :
  5. Smart
  6. : How do you replace the headlight bulb on a Smart 453?

Smart - Video tutorial

Model: Smart Smart 453 - Years 2014-2022
Part: Headlight bulb
Operation: How do you replace the headlight bulb on a Smart 453?

Replacing the bulb of the Smart 453 is done by pulling the two hooks located on either side of the car's grille, so that the front hood can be lifted; once this has been removed, it will be possible to locate the corresponding internal part of the headlight. Here, the internal protective cover will need to be removed, which should be detached by pulling the bulb from inside its housing and disconnecting the appropriate connectors; after removing the old bulb, it will be possible to connect the new one to the connector, and then close the headlight.


Posted on 2 May 2023 by ScegliAuto



Smart Fortwo 453 headlight bulb replacement
Smart (2014-2022 / 453) In this short and simple guide we will see the main instructions for removing and replacing the headlight bulb of the Smart Fortwo 453. First we open
How do you replace the taillight bulb of the Smart car?
Smart (2014-2022 / 453) In order to replace the rear headlight bulb of the Smart, you need to open the rear hatch so that you can locate the screws next to the headlight tha
Replacement of the rear light bulbs of the Smart 453.
Smart (2014-2022 / 453) If we notice that one of the rear headlight bulbs of the Smart car is burnt out, we should replace them as soon as possible in order to drive safely

Other guides that may interest you

    Frequently Asked Questions

    • Smart 1998-2007 - What problems can the dipped beam lights of the Smart create? Read Answer
    • Smart 1998-2007 - How to replace the left headlight bulb on a 2001 Smart? Read Answer
    • Smart 1998-2007 - What are the sidelights on the Smart 450? Read Answer
    • Smart 2007-2015 - How do I replace the front position light for the Smart 451? Read Answer
    • Smart 2007-2015 - How to replace the low beam bulb in the Smart Fortwo? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos