Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the spark plugs on Smart Fortwo 450

Model: Smart Smart 450 - Years 1998-2007
Part: Spark plugs

As you already know, on Smart Fortwo the engine is accessed from the rear, therefore from the trunk. Unscrew the engine compartment bolts and remove it. We can already see the first three candles (if you don't know which ones they are, follow the video). Now you just need to unscrew the spark plug and insert the new one, screwing it obviously. You may already know that your spark plug car actually has six! Where are the other three? We tell you. It is located behind the right rear wheel arch, which you will then need to remove by unscrewing its bolts. Again nothing complex: unscrew the exhausted candle and put on the new one.

Posted on 6 June 2021 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the spark plugs of the Smart Fortwo?
How do you remove the spark plugs of the Smart Fortwo?
Smart (1998-2007 / 450) Let's see in this guide the main steps that will allow us to disassemble and replace the Smart Fortwo spark plugs. First of all we access the rear pa…
Extraction of Smart Fortwo spark plug caps
Extraction of Smart Fortwo spark plug caps
Smart (1998-2007 / 450) In this video we will see how to extract the Smart 450 spark plug caps. The operation is a bit complicated as these caps are housed inside the cylind…
How do you replace the spark plugs on the Smart Fortwo?
How do you replace the spark plugs on the Smart Fortwo?
Smart (1998-2007 / 450) In order to replace the spark plugs on the Smart Fortwo, you need to open the tailgate of the luggage compartment, so that you can unscrew all the bo…

Other guides you may be interested in

How to Replace the Timing Belt on the BMW X3

Unlatch and lift the hood, then you will need to remove all the parts above the area where you will be working. As shown in the video, you can remove the screws to take off the upper panels. Now you need to remove the air filter cover from the engine. In any case, you will need to remove all obstructing parts until you reach the belt. In the diagram, you can see which pulley acts as the tensioner, so loosen it to remove the belt. Once the tension is off the belt, you can take it out and replace it without issues. Retrace the steps in reverse for reassembly of the various components.

Watch the video!


by ScegliAuto

More videos