Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Smart Fortwo 451 1.0 MHD clutch disassembly instructions

Model: Smart Smart 451 - Years 2007-2015
Part: Clutch

In today's video tutorial we will see the main steps to be able to remove and replace the clutch in a Smart Fortwo 451 1.0 MHD. To access the clutch it is necessary to first disassemble the rear bumper of our car, unscrewing all the fixing screws; therefore it will be necessary to also remove the muffler and disassemble the drive shaft of our car, in order to access the gearbox which we find positioned in a longitudinal position. Once the gearbox has been disassembled, we remove the clutch, disassemble its discs and replace it with the new one!

Posted on 2 July 2021 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the clutch of the Smart ForTwo?
How do you replace the clutch of the Smart ForTwo?
Smart (2007-2015 / 451) In order to replace the clutch of the Smart ForTwo, it is necessary to access the engine compartment of the car, which is located immediately under t…
Guide to replace the clutch of the Smart Fortwo
Guide to replace the clutch of the Smart Fortwo
Smart (2007-2015 / 451) In today's video tutorial we will see how to remove and replace the clutch of the Smart Fortwo 451, following the instructions below. First we open t…
Smart Fortwo 451 lambda probe disassembly instructions
Smart Fortwo 451 lambda probe disassembly instructions
Smart (2007-2015 / 451) In this tutorial we will see the instructions that will allow us to remove the lambda probe, or the oxygen sensor, on a Smart Fortwo 451. Our sensor …

Other guides you may be interested in

How to Remove the Original Radio on a Honda CR-V

How do you remove the original radio on a Honda CR-V? First, use a plastic lever to remove the side cover of the radio (the air vents), then, with a screwdriver, unscrew the securing screws located on the sides (if present). After unscrewing the side screws (and disconnecting the clips) of the stereo, pull it out from its slot and remove it (disconnect the various power connectors at the back). To install the new stereo and the various removed parts, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos