Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : How to remove the alternator of a Smart ForTwo

Smart - Video tutorial

Model: Smart Smart 451 - Years 2007-2015
Part: Alternator
Operation: How to remove the alternator of a Smart ForTwo

Before we can begin, we will have to go and lift the rear side of our Smart ForTwo. So let's start by unscrewing and removing the bolts that secure the right rear wheel, and then removing the wheel itself. After that, we will have to unscrew and remove the bolts that secure the alternator to its housing. By doing so, we will have freed the alternator itself. At this point, we will have to go to disconnect the electrical connectors connected to the alternator. When we have completed this last step, we will be able to extract the alternator from the engine compartment, and we will have finished the disassembly.


Posted on 14 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Smart 1998-2007 - Where is the alternator fuse located in the Smart car? Read Answer
    • Smart 2007-2015 - What problems does the Smart alternator cause? Read Answer
    • Smart 2007-2015 - Problems with the alternator on the Smart? Read Answer
    • Smart 2014-2022 - How much does the Smart alternator cost? Read Answer
    • Smart 1998-2007 - What is the problem with the Smart Fortwo CDI alternator? Read Answer
    • Smart 1998-2007 - What problems can the Smart 450 alternator present? Read Answer
    • Smart 1998-2007 - How to recognize an alternator problem in the Smart ForTwo? Read Answer
    • Smart 1998-2007 - What to do if the Smart alternator has problems? Read Answer
    • Smart 2007-2015 - The Smart does not start, what could be the reasons? Read Answer
    • Smart 2007-2015 - How much does the Smart mhd alternator cost? Read Answer
    • Smart 1998-2007 - How much does the alternator cost for the Smart diesel? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos