Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the outside handle of the Smart 451?

Model: Smart Smart 451 - Years 2007-2015
Part: Handle

In order to remove the external door handle of the Smart 451, a screwdriver must be leveraged inside the housing of the side glass, so that the external door panel can be detached. By moving the external panel, it will be possible to access the screws below that secure the external handle in its housing. Now the door will have to be opened to unscrew the bolt located inside the panel, at the handle. Now the latter will have been released and can be extracted from its housing by disconnecting the connector at the rear.

Posted on 25 November 2021 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the Smart 451 handle
Disassembly of the Smart 451 handle
Smart (2007-2015 / 451) How to remove the outside handle of the Smart Fortwo? Let's see briefly how to remove the handle and how to remove it from the door housing. In order…
How do you remove the outside handle of the Smart 450?
How do you remove the outside handle of the Smart 450?
Smart (1998-2007 / 450) In order to remove the external handle of the Smart 450, the door must be opened and the bolt located on the inside, corresponding to the external ha…
How do I replace the rear light bulb on the Smart 451?
How do I replace the rear light bulb on the Smart 451?
Smart (2007-2015 / 451) In order to replace the rear light bulb of the Smart 451, the tailgate of the luggage compartment must be lowered and the plastic cover located on th…

How to Replace the Thermostat on a Fiat Punto 2 Series 8v

When replacing the thermostat, it is advisable to drain the coolant system completely. The thermostat is located just above the gearbox, directly under the ignition coils. To facilitate the replacement, disconnect the intake duct hose and remove the coil pack. At this point, disconnect the connector from the thermostat and proceed to remove the corresponding fixing pins to replace it with the new one, ensuring to use a new gasket.

Watch the video!


by ScegliAuto

More videos