Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the wipers of the Smart Fortwo 451

Model: Smart Smart 451 - Years 2007-2015
Part: Windshield wipers

Let's see in this short and simple video how to remove and replace the wiper blades of the Smart Fortwo 451, but also of the 453. First, let's move to the front side and start by raising the arm of our wiper; then we go to rotate and release the plastic clip of the wiper, in order to slide it out and remove it, as shown in the video. At this point we are going to insert the new windshield wiper on the pin, fixing it correctly until you hear the coupling noise; in the same way we will eventually replace the rear wiper!

Posted on 12 January 2022 by ScegliAuto

Video tutorial

Related tutorials

Windshield replacement on the Smart Fortwo 451
Windshield replacement on the Smart Fortwo 451
Smart (2007-2015 / 451) In this video tutorial we will see how to remove and replace the windshield on the Smart Fortwo 451, following the instructions below. First we remov…
How do I replace the cabin filter in the Smart Fortwo 450?
How do I replace the cabin filter in the Smart Fortwo 450?
Smart (2007-2015 / 451) The replacement of the cabin filter of the Smart Fortwo 451 takes about 20 minutes of work. The filter is located inside the passenger compartment, n…
How to install the clutch actuator on the Smart Fortwo 451
How to install the clutch actuator on the Smart Fortwo 451
Smart (2007-2015 / 451) In today's video tutorial we will see how to install the clutch actuator on the Smart Fortwo 451, following the instructions below. First of all we l…

How to Turn Off/Reset the Maintenance Service Light on a Fiat 500

Learn how to turn off/reset the oil maintenance service light on a Fiat 500. This is a very simple operation; enter the vehicle and turn on the instrument panel; press the accelerator pedal three times in quick succession, then release the pedal, turn off the instrument panel and remove the key from the ignition. Reinsert the key and turn on the instrument panel, then wait for it to illuminate. Finally, check the changes made to the car. Always remember to perform onboard computer modifications with the engine off.

Watch the video!


by ScegliAuto

More videos