Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : How to disassemble and replace the speakers of the Smart Fortwo

Smart - Video tutorial

Model: Smart Smart 451 - Years 2007-2015
Part: Loudspeaker
Operation: How to disassemble and replace the speakers of the Smart Fortwo

In today's video tutorial we will see how to remove and replace the front door speakers of the Smart Fortwo, following these simple steps. First of all we open the front door and start by removing the plastic bulkhead that we find on the door panel, levering the sides; after which we unscrew the loudspeaker fixing screws, which we find on the sides, disconnecting the electrical connector to remove it definitively, as shown in the video. At this point we replace the speaker box with the new one, of the right type, then reassemble everything!


Posted on 8 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Smart 2007-2015 - How do you disassemble the Smart's speakers? Read Answer
    • Smart 2007-2015 - How to disassemble the Smart Fortwo speakers? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos