Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : Replacing the diesel filter of the Smart Fortwo 800 CDI

Smart - Video tutorial

Model: Smart Smart 450 - Years 1998-2007
Part: Diesel filter
Operation: Replacing the diesel filter of the Smart Fortwo 800 CDI

Let's see in this guide the steps that will allow us to disassemble and replace the diesel filter of the Smart Fortwo 800 CDI. First of all we lift the car and start by unscrewing the screw of the bracket of our diesel filter, in order to remove it; then we disconnect the fuel inlet and outlet pipes and unscrew the screw to loosen the bracket from the diesel filter, as shown in the video. At this point we replace the filter with the new one, with the original spare; reassemble the filter on the bracket and connect the two pipes, applying the reverse procedure!


Posted on 20 April 2024 by ScegliAuto



How to replace the diesel filter on a Smart Fortwo Diesel
Smart (2007-2015 / 451) Before we can begin, we will have to go and raise the rear of our Smart ForTwo Diesel. We then start by disconnecting the hoses connected to the dies
Guide to replace the thermostat of the Smart Fortwo 800 Diesel
Smart (1998-2007 / 450) In this video we will see how to remove and replace the coolant temperature thermostat of the Smart Fortwo 800 Diesel. First, let's move to the rear
Guide to replacing the starter motor of the Smart Fortwo 0.8 CDI.
Smart (1998-2007 / 450) In this video tutorial, we will see the main steps useful for disassembling and replacing the starter motor of the Smart Fortwo 0.8 CDI. First, we op

    Frequently Asked Questions

    • Smart 2007-2015 - Where is the diesel filter in a 2012 Smart 800 Read Answer
    • Smart 1998-2007 - Where is the diesel filter of the Smart diesel? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos