Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Smart
    3. :
  3. Smart
    4. : How to remove and replace the diesel filter on Smart Fortwo

Smart - Video tutorial

Model: Smart Smart 450 - Years 1998-2007
Part: Diesel filter
Operation: How to remove and replace the diesel filter on Smart Fortwo

Let's see how to remove and replace the diesel filter present on a Smart Fortwo: we lift the car on a column or jack bridge and identify the diesel filter as in the video. With a socket wrench we unscrew the locking pins located near the container (disconnect the cables and the various tubes from the filter) where the diesel filter is located. Once the filter has been removed, remove it from the car (replace it with a new filter). Finally we reassemble the filter to the attached container of the diesel filter (we connect pipes and cables) and tighten the appropriate pins. We close the front hood finally.


Posted on 25 October 2023 by ScegliAuto



How to replace the diesel filter on a Smart Fortwo Diesel
Smart (2007-2015 / 451) Before we can begin, we will have to go and raise the rear of our Smart ForTwo Diesel. We then start by disconnecting the hoses connected to the dies
Replacing the diesel filter of the Smart Fortwo 800 CDI
Smart (1998-2007 / 450) Let's see in this guide the steps that will allow us to disassemble and replace the diesel filter of the Smart Fortwo 800 CDI. First of all we lift t
Removing the Smart Fortwo fuel filter
Smart (2007-2015 / 451) In this short video tutorial we will see how to remove and replace the diesel filter of a second series Smart Fortwo. First we go to lift the car wit

    Frequently Asked Questions

    • Smart 2007-2015 - Where is the diesel filter in a 2012 Smart 800 Read Answer
    • Smart 1998-2007 - Where is the diesel filter of the Smart diesel? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos