Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do I remove the front bumper of the Smart 451?

Model: Smart Smart 451 - Years 2007-2015
Part: Front bumper

In the Smart 451 the front bumper is joined directly to the mudguards: therefore, in order to remove it, it will be necessary to loosen the screws that secure the entire nose of the car next to the external rear-view mirrors. Once these screws have been removed, it will be possible to go and unhook the internal fixing clips of the piece and disconnect all the connectors, so that the entire nose of the car can be completely removed. Once this has been removed, it will be possible to insert the new piece, which must be connected to the connectors and fixed with the appropriate screws.

Posted on 21 March 2022 by ScegliAuto

Video tutorial

Related tutorials

Remove the front bumper of the Smart Fortwo 451
Remove the front bumper of the Smart Fortwo 451
Smart (2007-2015 / 451) In this guide we will find out how to remove and replace the front bumper or panel of the Smart Fortwo 451, following these simple steps. First of al…
How do you remove the front bumper of the Smart car?
How do you remove the front bumper of the Smart car?
Smart (2007-2015 / 451) The procedure for removing the front bumper of the Smart car involves removing the hood panel so that all the screws holding the bumper from the top …
How to remove the front bumper of a Smart ForTwo
How to remove the front bumper of a Smart ForTwo
Smart (2004-2006 / Fourfour1, 454) Before we can begin, we will have to go and open the doors of our Smart ForTwo. So let's start by unscrewing and removing the screws that secure the …

How to Install an Additional Horn on a Fiat Punto

It may happen that the original horn starts to produce a sound that is noticeably underwhelming; at this point, you can decide to install a pair of sounders connected in parallel with the original one to achieve a more assertive sound. The installation is very easy, but it is important to direct the sound output towards an air intake, so you need to shape a support bracket to fix it to the slam panel with a single bolt. Once secured, take the positive power from the fuse box using a 2.5 mm² cable, tapping into the purple wire directly under the relay while connecting the ground directly to the negative terminal of the battery.

Watch the video!


by ScegliAuto

More videos