Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the shock absorbers of the Smart 451?

Model: Smart Smart 451 - Years 2007-2015
Part: Shocks

In order to replace the shock absorbers of the Smart 451 you have to go and lift the car, so that the wheel corresponding to the shock absorber to be removed can be completely removed. After this has been removed, it will be possible to loosen the bolts that secure the shock absorber in the upper part and also in the lower part, at the hub. When the shock absorber has been released, it will be possible to go and completely extract the piece from its housing, so that a new one can be inserted. After installation, you will also need to mount the corresponding wheel.

Posted on 23 March 2022 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the Smart Fortwo 451 shock absorber
Disassembly of the Smart Fortwo 451 shock absorber
Smart (2007-2015 / 451) In today's video tutorial we will see how to remove and replace the shock absorbers of a Smart Fortwo 451. First we go to remove the wheel of the aff…
How do you replace the speakers of the Smart 451?
How do you replace the speakers of the Smart 451?
Smart (2007-2015 / 451) In order to replace the speakers of the Smart 451, you need to pry an object, such as a screwdriver, to remove the external casing cover, wedged in t…
How to change the front shock absorbers of the Smart Fortwo
How to change the front shock absorbers of the Smart Fortwo
Smart (2007-2015 / 451) Let's see in this guide how to remove and replace the front shock absorbers of the Smart Fortwo, following these simple steps. First of all we lift t…

How to Replace the Cabin Fan Resistor on a BMW 3 Series

How to Replace the Cabin Fan Resistor on a BMW 3 Series. Open the door and remove the plastic cover under the dashboard on the right side. Use a trim tool to pry off the cover next to the dashboard. Get a screwdriver or a cordless drill, open the glove compartment, and unscrew the fastening screws around the perimeter with a screwdriver. Once this is done, pull out the glove compartment and disconnect the power cables. Remove the fan resistor from its housing, insert the new part into the filter holder, and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos