Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the traction control of the Smart 451

Model: Smart Smart 451 - Years 2007-2015
Part: Onboard computer

The traction control system integrated in the Smart 451 is very important as it guarantees greater grip and control while driving. For this reason it must be deactivated only in case of need or malfunctions. Let's find out how. The required procedure is very simple and can be completed in a few seconds. First, start with the car completely off and the doors closed. Locate the two buttons located inside the instrument panel and keep them pressed at the same time. Insert the key and start the ignition. As soon as the TC light starts flashing, release the two buttons and you are done.

Posted on 30 March 2022 by ScegliAuto

Video tutorial

Related tutorials

How to deactivate ESP on Smart 451
How to deactivate ESP on Smart 451
Smart (2007-2015 / 451) ESP is the acronym for Electronic Stability Program, and in Italy it is also known as ESC, which stands for Electronic Stability Control. It is turne…
How to deactivate the Start&Stop system of the Smart 451
How to deactivate the Start&Stop system of the Smart 451
Smart (2007-2015 / 451) Disabling the START&STOP system of the Smart 451 permanently is a very simple operation, which can be carried out independently thanks to our short v…
How to activate the cruise control of the Smart Fortwo
How to activate the cruise control of the Smart Fortwo
Smart (2014-2022 / 453) In this guide we will see the main instructions on how to activate the cruise control system on the Smart Fortwo. First of all, get on board the car …

How to Replace the Rear Headlight Bulbs on a Peugeot 308

Are the rear lights on your Peugeot 308 SW not working? This video shows how to replace the damaged bulbs. Open the boot lid, and using a screwdriver, unscrew (with a socket wrench or screwdriver with a bit) the securing nuts located at the side of the rear headlight. Once the headlight is free from any constraints, detach it from the bodywork (disconnect the relevant power connectors). Replace the damaged bulbs with identical ones in size and voltage. Finally, refit the headlight and reverse the assembly of the other parts.

Watch the video!


by ScegliAuto

More videos