Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Smart Roadster spark plug replacement

Model: Smart Smart Roadster, 452 - Years 2003-2005
Part: Spark plugs

Today we will see, in this video tutorial, how to remove and replace the spark plugs of the Smart Roadster engine, following the instructions below. First we open the rear engine hood and remove the metal bulkhead; then we go to connect the connectors of our spark plugs, then using a socket wrench with extension to unscrew and remove them, as shown in the video. At this point we replace the spark plugs with new ones (in total six), having the same thermal gradation and the same pitch; we screw the candles by hand and then tighten with a key!

Posted on 3 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch Actuator on the Smart Roadster?
How to Replace the Clutch Actuator on the Smart Roadster?
Smart (2003-2005 / Roadster, 452) You can replace the clutch actuator on the Smart Roadster by lifting the car to access the components underneath: once the vehicle is lifted, you can…
How to program the ignition key of the Smart Roadster
How to program the ignition key of the Smart Roadster
Smart (2003-2005 / Roadster, 452) Below we will see the information related to the programming of the ignition key of the Smart Roadster, using the Delphi 150e as a programming tool. …
How to reset the service light on the 2006 Smart Roadster
How to reset the service light on the 2006 Smart Roadster
Smart (2003-2005 / Roadster, 452) In the following guide we will find out what are the various steps you need to perform if you want to manually reset the service light on your 2006 S…

Other guides you may be interested in

How to Remove the Centre Console on a Renault Scenic

Watch this video to learn how to remove the glove compartment from the rear cover of the centre console on a Renault Scenic. Use a plastic lever to pry at the edge of the side plastics as shown in the video. Once the plastics are removed, unscrew the screws located at the sides of the centre console with a suitable screwdriver, and disconnect all the power connectors. Remove the side rests from the glove compartment. Fit the new piece onto the centre cover and proceed with the assembly of the remaining parts, working in reverse order.

Watch the video!


by ScegliAuto

More videos