Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the clutch actuator on the Smart Fortwo 451

Model: Smart Smart 451 - Years 2007-2015

In today's video tutorial we will see how to install the clutch actuator on the Smart Fortwo 451, following the instructions below. First of all we lift the car and we go to position the new actuator; then we fix the fixing screws on the special guides, as shown in the video. At this point we are going to make the adjustment of our actuator; It is possible to do this through the notches drawn on the guide itself (this type of adjustment is available on all Smart Fortwo 451s). We tighten the bolts to 10 Nm to complete the fastening operation!

Posted on 17 June 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the clutch actuator on a Smart Fortwo 451
How to replace the clutch actuator on a Smart Fortwo 451
Smart (2007-2015 / 451) To understand if it is necessary to replace the clutch actuator of a Smart Fortwo 451, it is necessary to carry out a check on it. Then open the bonn…
How to replace the clutch actuator in the Smart ForTwo?
How to replace the clutch actuator in the Smart ForTwo?
Smart (2007-2015 / 451) In this tutorial, we can see how to replace the clutch actuator in the Smart ForTwo 451, a simple operation if you have good manual skills. First of …
Replacement of the clutch actuator of the Smart 451
Replacement of the clutch actuator of the Smart 451
Smart (2007-2015 / 451) In this video, we can see how to replace the clutch actuator of the Smart 451. The youtuber purchased a Sachs actuator, which can be found on the web…

    Frequently Asked Questions

    • Smart 1998-2007 - Where is the lateral acceleration sensor located in a Smart 450? Read answer

Reset Tyre Pressure Light Toyota Yaris 2016

Due to advancements in onboard electronics, many vehicles are equipped with various sensors that monitor several operating parameters, including tyre pressure. Even if the pressure is correct, the warning light may sometimes illuminate on the dashboard. First, check with a gauge that the pressure in all 4 tyres matches the manufacturer's specifications. For the 2016 Toyota Yaris, the values are as follows: Front: 2.2 bar for T-type tyres, 2.3 for H-type, 2.4 for W-type. Rear: 2.2 bar for all tyre types. To reset the pressure light, turn on the ignition with the key, locate the reset button under the steering column. Press it for 3 seconds, and the light will flash 3 times before turning off. Remove the key from the ignition and start the vehicle.

Watch the video!


by ScegliAuto

More videos