Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter of the Smart 450

Model: Smart Smart 450 - Years 1998-2007
Part: Air filter

If you do not want to have problems with overheating or loss of power of the engine of your Smart 450 then you must necessarily replace the air filter periodically. Below we will find out how this operation is carried out independently. First, switch off your Smart 450 and go to the rear area. Raise the hood and locate the air filter box on the left side. At this point all that remains is to remove the cover of the box and proceed with the replacement of the old filter with the new one. Finally, put the lid back on and you are done.

Posted on 3 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter on Smart 450.
How to replace the air filter on Smart 450.
Smart (1998-2007 / 450) In this video tutorial we can see how it is possible to replace the air filter on Smart 450, following a few simple steps. The first thing we need to…
Air filter replacement for Smart 450
Air filter replacement for Smart 450
Smart (1998-2007 / 450) To replace the air filter that feeds the injection system of the Smart 450 engine, we open the rear hood, lift the lining, unscrew the screw that loc…
How to replace the cabin air filter of the Smart Fortwo.
How to replace the cabin air filter of the Smart Fortwo.
Smart (1998-2007 / 450) The air filter of the Smart Fortwo model 450 is located inside the trunk under the carpet cover. To replace the filter, we need to open the trunk and…

Other guides you may be interested in

How to Replace the Bulbs on a Nissan Almera Rear Light

Do you want to change the damaged bulb of a rear light on a Nissan Almera? Follow this video carefully to proceed correctly. Open the boot, remove the fabric side covering, and detach the plastic rivets on the covering. Unscrew the retaining bolts of the rear light using a socket spanner. Once the light is free from the bolts, pull the rear light out of the metal housing, then disconnect the power cable. Place the stop light on a comfortable surface and replace all worn bulbs. To refit the rear light, position it in its housing and tighten all screws after reconnecting the lighting connector.

Watch the video!


by ScegliAuto

More videos