Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the Smart 450?

Model: Smart Smart 450 - Years 1998-2007
Part: Checks and maintenance

The fuses in a car are always placed in the relative box that contains and preserves them. In the Smart 450 the fuse box is located in the passenger compartment of the vehicle and exactly between the understeer compartment and the pedal board. When a fuse is broken, it can be found by seeing the break in its internal wire / contact. In case you decide to replace it yourself, pull out the fuse and remember exactly. From where you removed it, insert it again paying attention to the small number above it that indicates its resistance. For more complex jobs, the entire box with its wiring must be unhooked.

Posted on 4 July 2022 by ScegliAuto

Video tutorial

Related tutorials

Where is the Smart 450 fuse box located
Where is the Smart 450 fuse box located
Smart (1998-2007 / 450) In this video we can see where the fuse box of the Smart 450 is located. In the Smart 450 we can find two fuse boxes: one positioned on the driver's …
What is the Smart Fortwo 450 fuse diagram?
What is the Smart Fortwo 450 fuse diagram?
Smart (1998-2007 / 450) In the Smart Fortwo 450, the first series, there are two fuse boxes, one located under the dashboard on the driver's side and the other under the sea…
Where are the fuse boxes located on the Smart Fortwo 450?
Where are the fuse boxes located on the Smart Fortwo 450?
Smart (1998-2007 / 450) In this guide we will see the placement of fuse boxes on a Smart Fortwo 450, first series, along with the fuse diagram. First of all, let's identify …

    Frequently Asked Questions

    • Smart 1998-2007 - What is the problem with the Smart 450's steering angle sensor? Read answer

How to Remove the Front Brake Pads on a Chrysler PT Cruiser

To remove the front brake pads on a Chrysler PT Cruiser, position the car on a column lift and raise it to a comfortable height. Unscrew the pins using a socket wrench or air drill and remove the wheel. Then, use a screwdriver to detach the brake pads. Next, remove the caliper bracket and unscrew the pins on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Install the new brake disc with all associated pins, secure the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all pins are tightened properly. Before mounting the wheel, bleed the brake caliper and tighten the pin.

Watch the video!


by ScegliAuto

More videos