Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : How to replace the panel of a Renault Megane

Renault Megane - Video tutorial

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Door panel
Operation: How to replace the panel of a Renault Megane

How to replace the panel of a Renault Megane? Don't worry, let's see how to proceed. Before starting the disassembly work, let's disconnect the battery terminals in the engine compartment. We remove the plastic coating of the handle with a lever, with a screwdriver we go to unscrew the internal door handle, (we unscrew the screws placed in it). Once the handle has been removed: remove the courtesy light, unscrew the interior door opening lever. We detach the door panel, unhook the speaker. Let's not lose all the interlocking clips placed behind the plastic panel disassembled first. We replace the piece and reassemble everything going backwards.


Posted on 15 November 2023 by ScegliAuto

This video is currently unavailable


How to change the system language of the Renault Megane 4
Renault Megane (2015-2023 / Megane 4, Megane IV) Changing the system language used on your Renault Megane Mk4 is really very simple and thanks to the instructions in this new guide, you will be able
How to remove the door panel of a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) How to remove the door panel (passenger side) of a Renault Megane? This video explains how to proceed. Before starting the disassembly work, let's di
How to remove the door panel in the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial we can see how to remove the front door panel in the Renault Megane 3, a very simple operation. First of all, unscrew the six screws

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos