Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box on the Smart Fortwo

Model: Smart Smart 451 - Years 2007-2015
Part: Fuse box

Contrary to what one might think, the fuse box is often found in places that are very easy to reach, albeit hidden for safety reasons. Before finding out where the Smart Fortwo box is located, we invite you to leave the engine off and disconnect the battery so that you can carry out any maintenance in total safety. Once this is done, go inside the vehicle, to the driver's side, and locate the plastic cover located just below the steering wheel. Gently lower it without removing it completely and immediately below you will finally have access to the fuse box.

Posted on 1 August 2022 by ScegliAuto

Video tutorial

Related tutorials

Where is it and how to get to the cigarette lighter fuse of a Smart ForTwo?
Where is it and how to get to the cigarette lighter fuse of a Smart ForTwo?
Smart (2007-2015 / 451) The cigarette lighter fuse of our Smart ForTwo is located inside the fuse box. In turn, the fuse box is located under the left side of the steering c…
Where are the fuses located in the Smart ForTwo?
Where are the fuses located in the Smart ForTwo?
Smart (2007-2015 / 451) The specific fuse box of the Smart ForTwo will be located inside the cabin, in the part immediately below the dashboard trim panel, on the driver's s…
Where is the fuse box of the Smart Fortwo
Where is the fuse box of the Smart Fortwo
Smart (1998-2007 / 450) Knowing the exact position in which the fuse box of your Smart Fortwo Mk1 is located is very important as this allows you to intervene in a targeted …

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2007-2015 - Where is the fuel pump relay on a Smart ForTwo located? Read answer

How to Remove the Headlight Bulbs on a Toyota Rav4

Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap (if present) on the headlight and remove it (located at the rear of the headlight). At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver and pliers. Fit the new bulb (ensuring it is the correct type and size), insert the bulb holder back into the headlight housing, and close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos