Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine mount on a Smart

Model: Smart Smart 454, Fourfour1 - Years 2004-2006
Part: Engine mount

Changing the engine mount may seem like something out of our options, but it is nothing special, it is a piece like any other, which can be bought on E-Bay. We found one identical to the one in the video right there at 138.00 euros. First we lift the car, using a jack, do not trust our jack too much. We remove the 18 mm bolt. There are three more 12mm and then 2 14mm bolts to remove. : Once we have removed the old support, we can reassemble the new one following the reverse path. Fortunately, on the sdmart the pieces are all easily accessible.

Posted on 14 October 2022 by ScegliAuto

Video tutorial

Related tutorials

Do you need to remove the engine to change the head gasket of the Smart car?
Do you need to remove the engine to change the head gasket of the Smart car?
Smart (2007-2015 / 451) In this video we see how to change the burnt gasket from the engine cylinder head of a Smart 451: Unfortunately, to do this operation it is necessary…
How do you replace the engine mount in the Smart 451?
How do you replace the engine mount in the Smart 451?
Smart (2007-2015 / 451) When using the car, if at some point you notice a noise and vibration coming from the engine, it is advisable to check the engine support bracket. It…
How to replace the engine's central support in the Smart ForTwo?
How to replace the engine's central support in the Smart ForTwo?
Smart (2007-2015 / 451) In this tutorial, we can see how to replace the engine's central support in the Smart ForTwo, an extremely simple and quick operation. First of all, …

Other guides you may be interested in

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos