Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Engine from the Smart 450?

Model: Smart Smart 450 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Engine

See other generations:
Video tutorial

To remove the engine from the Smart 450, open the rear hatch of the car to access the screws that secure the rear bumper. The bumper must be removed, along with the screws that secure the upper cover of the boot, to take off this panel.

This will allow you to loosen the screws of the supports that secure the engine at the top. You can then also loosen the supports that secure the engine at the bottom, completely removing the engine from its housing and replacing it with a new one.


Updated on 23 June 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the Smart 450
How to Replace the Air Filter on the Smart 450
Smart (1998-2007 / 450) If you want to avoid overheating or loss of power in your Smart 450, you must periodically replace the air filter. Below, we will discover how to per…
Where to Find the OBD Port of the Smart Fortwo 450
Where to Find the OBD Port of the Smart Fortwo 450
Smart (1998-2007 / 450) To locate the OBD port inside the cabin of your Smart Fortwo 450, you only need a few seconds. Follow the steps below in the order described. First, …
How to Remove the Rear Light of the Smart 450?
How to Remove the Rear Light of the Smart 450?
Smart (1998-2007 / 450) To remove the rear light of the Smart 450, open the boot and loosen the two bolts located between the seal and the three rear lights. This will allow…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos